RPM adjustable between 27.5 and 276 with steps of 0.5 RPM. Being 1.8 meters long with 3 rolls, this bottle roller will hold multiple bottles.
![1](https://redesign.911metallurgist.com/wp-content/uploads/2024/03/1-54.jpg)
RPM adjustable between 27.5 and 276 with steps of 0.5 RPM. Being 1.8 meters long with 3 rolls, this bottle roller will hold multiple bottles.
When selecting the right place for the machine, please consider the following:
– Put the device on smooth, horizontal and stable place.
– Leave enough space beyond the device for normal air circulation, min. 200 mm at the back of the machine.
– Leave enough space around the device, that you will easy control and maintain it.
– Don’t use the device in surroundings, where there are fast temperature and humidity changes. Also avoid places exposed to direct sunlight and places nearby heating devices.
– Avoid places, where the possibility of shocks and vibrations exists.
Note: The machine should not be placed so, that it is difficult to pull out the cord plug from main power supply.
Element | Description | Function |
A | Control panel | Used to set up programs and control the machine |
B | Emergency stop button | It can be pressed in case of emergency to stop the machine |
C | Safety switch | To close the cage properly |
D | Safety cage | Protection to prevent objects from falling in |
E | Rollers | Used to place the bottles on |
Note: The machine should not be placed so, that it is difficult to pull out the cord plug from main power supply.
Copyright 2012-2024 911Metallurgist | All Rights Reserved