pH Ranges for Sequential Cu Pb Zn Flotation | Separation

What pH do Cu Pb Zn separate at

To understand froth flotation, first read that article and come back to read about sequential flotation of Copper, Lead and Zinc.

Sequential_Cu_Pb_Zn_Flotation_Process_Flowsheet

Given a baseline amount of frother and collector, these curves are the approximate/relative rate of flotation recovery of Copper (Chalcopyrite/Bornite/Chalcocite/Covellite/Tennantite/Enargite/Tetrahedrite /Freibergite ), Lead (Galena) and Zinc (Sphalerite) as well as iron (pyrite/arsenopyrite) minerals VS pH.

pH_VS_Metal_Recovery_

With a slurry’s natural pH is 9, it becomes clear Cu/Pb/Zn cannot be separated from each other nor from Fe. At pH 9 now, most of all metals would float. As shown here below, assuming Collector addition is Optimum, pH and MBS in the Copper Circuit drives Pb content in the Cu Conc.

effect_of_MBS_on_flotation

Float Metals One-by-One Selectively: Since our objective is to sequentially float Copper, then Lead, than Zinc while rejecting Pyrite, let us explore how we can separate Cu/Pb/Zn from Fe:

  • pH 6-6.5 is where Pb/Zn/Fe are least hydrophobic while Cu is most hydrophobic. Great pH to Recover Cu.
  • pH 7.5-8 is where Zn/Fe are least hydrophobic while Pb (and Cu) is most hydrophobic. Great pH to Recover Pb.
  • pH 10.5-12 is where Fe is least hydrophobic while Zn (and Cu/Pb) is most hydrophobic. Great pH to Recover Zn.

pH_ranges_for_separation_and_flotation_of_Cu_Pb_ZnBy modifying Flotation pH to create kinetic/speed differences between the metals and achieve sequential flotation and take full advantage of the hydrophobic nature of each mineral, it is best to first lower the pH and see about recovering copper. MBS is the pH modifier of choice to dropping pH into a zone where Cu is hydrophobic while all other metals are hydrophilic provided an opportunity.

As MBS is added and pH drops from Natural pH 9, other minerals are depressed is this order:

  1. Iron (pyrite)
  2. Zinc
  3. Lead
  4. Copper (Chalcopyrite and others) As Lime is added and rises pH towards 12, depressed again is Iron (pyrite), followed by Zinc.
    ** Activated Zinc, in the Cu and/or Pb Circuit, will float like Copper.cu-pb-zn separation

More on SEQUENTIAL FLOTATION OF SULFIDE ORES

SEQUENTIAL_FLOTATION_OF_SULFIDE_ORES